Call: 0845 838 6278

Free: 0800 047 0842

Assessment. Your dentist may need to take x-rays as well as photographs. Your dentist may also need to take dental impressions (dental molds) from which they will make a plaster cast of your mouth. During the examination appointment you will need to convey to your dentist the types of changes you are interested in obtaining.

Teeth preparation. Before the process of making your veneers is begun, your dentist will anaesthetize your tooth and the gum tissue around the tooth. When preparing a tooth for a porcelain veneer the enamel on the front side of the tooth, the side where the porcelain veneer will be bonded, must be trimmed back Veneers are thin like contact lenses, and will usually only need tooth reduction of 0.5mm to 1.0mm. If a drastic change is being made for the result you want, reduction may be 1.0mm to 2.0mm.

Impression taking. Your dentist will use impression paste or putty to make the impressions of the prepared teeth. The impressions are sent to a dental laboratory where the veneers will be manufactured. The veneers are usually returned to your dentist’s office in 4 – 6 days. Your dentist will also select the shade that most closely matches the colour of the neighbouring teeth.

Temporaries. During this first office visit your dentist will make a temporary veneer to cover and protect the prepared teeth while the veneers are being made. Temporary veneers usually are made of acrylic and are held in place by temporary cement.

Receiving the permanent dental veneers. At your second visit, your dentist will remove your temporary veneers and check the fit and colour of the permanent veneers. If everything is acceptable, a local anaesthetic will be used to numb the tooth and the enamel surface of your tooth will be etched with a mild etching gel. This etching, on a microscopic level, roughens the surface of the tooth, just like glass that has been etched has a “frosted” texture. This enamel roughness aids in the cement’s ability to form a tenacious bond with the tooth, and it is a hallmark of dental bonding technique. Cement will now be placed into the veneer and the veneer will then in turn be placed on your tooth. The cement will be cured by shining a special light. This light (which is often blue) passes through the translucent veneer to the cement which lies underneath. The light activates a catalyst in the cement, causing it to cure in just a few moments.

See the following case studies for an example:

Case Study – Gum lift and veneers

Unhappy about her overlapping and discoloured teeth and uneven gum line our client opted to correct her smile in Hungary with gum contouring, porcelain veneers and a single metal free crown.

Case Study – Gappy and uneven smile

Longing for a fuller and more pronounced smile our client decided to take action and travelled abroad for dental treatment. Closing the gaps and reshaping the teeth, a fully revitalised look …